Static Conductive Self Leveling Epoxy Paint
Model: WTP-505C

Requirement on Floor  
Concrete strength ≥C25
Flatness: the maximum fall head in 2m distance < 3mm
Floor surface should be given waterproof treatment and dampproof treatment

Detailed Information about Epoxy Self Leveling Paint

Introduction	WTP-505C epoxy self leveling paint is a type of solvent-free two-component epoxy resin paint.
Characteristics of Static Conductive Self Leveling Epoxy Paint	1. Self leveling, smooth and bright paint film. 2. Painted floor is seamless and easy to clean 3. This static conductive self leveling epoxy paint is environmentally friendly due to its solvent-free formulation. 4. Electrostatic charge leaks quickly, thus preventing damages of electronic elements and fire caused by accumulation of static electricity. 5. Stable and durable surface resistance which is free from the influence of air temperature and surface abrasion. 6. Our self leveling epoxy paint provides its paint film with high density and good corrosion to chemicals. 7. A wide range of colors are available.
Where could epoxy floor paint be used?	Our static conductive self leveling epoxy paint is ideal for places needing antistatic coatings, so it is extensively used in electronics, communications, printing, powder material processing, chemicals, and aerospace industries, computer rooms, and precision machinery rooms. Epoxy paint is especially suitable for applying in production plants and warehouses for electronic instruments and electric components.
Physical parameters of self leveling epoxy paint	Model	WTP-505C-A	WTP-505C-B
	Color	Light yellow, near colorless	Color matchable
	Specific gravity	0.95±0.02	1.55±0.05
	Mixing ratio by weight	A: B＝1: 5
	Duration of service after mixing	60min (15℃)	30min (25℃)	15min (35℃)
	Touch dry	48h (15℃)	24h (25℃)	12h (35℃)
	Hard dry	10d (15℃)	7d (25℃)	4d (35℃)
	VOC content	<2% (after mixing)
Performance indexes	Items	Test method or standard	Indexes
	Hardness	Shore D	≥83
	Bending strength Mpa	GB 1042-79	≥45
	Compressive strength Mpa	GB/T17671-1999	≥70
	Wearing resistance (750g/500r)/g	GB1768-79	≤0.02
	Surface resistance Ω	SJ/T 11159-1998	2.5×104~1.0×106
	Resistance to engine oil and diesel oil	Immerse for 60 days	Make no difference
	Resistance to 20% sulfuric acid	Immerse for 20 days	No obvious variation
	Resistance to 20% sodium hydroxide	Immerse for 30 days	Make no difference
Application instruction on epoxy floor paint	Epoxy paint mixing Stir WTP-505C-B self leveling epoxy paint well before mixing. Mix WTP-505C-A and WTP-505C-B epoxy paint together, and stir for 2 minutes continuously. The mixed paint affixing on bucket may cause nonuniform mixing, so we recommend not using it directly.
	Reference coverage: 0.8kg/m2/coat ≤coverage ≤ 2.0 kg/m2/coat
	Paint film thickness: approx. 1.3mm
	Application conditions Our static conductive self leveling epoxy paint is designed for applying in 10℃ or higher. To avoid condensation of water vapor, the application surface should be clean and dry, and relative humidity should be lower than 85%.
Notes	1. Duration of service of mixed paint is calculated based on 5kg epoxy paint ingredient. Duration may decrease with the rising of temperature and amount of epoxy paint ingredient. 2. Our epoxy paint should be applied in clean, dry, and ventilated environment. 3. After static conductive base coat is fully dried, the surface resistance should be less than 1.0×104Ω. 4. Apply epoxy finishing coat directly on static conductive base coat. Paint film should be formed at a stroke. Multi-coat may influence the paint's static conductive performance. 5. During application and curing period, the relative humidity should be lower than 80%. Or else, the paint film may be dulling and blurring.
Storage	Our epoxy self leveling paint should be stored in ventilated and dry places, and keep away from direct sunlight and freezing.
Shelf life	6 months
Service life	10 years

Structural Diagram of Floor The following picture is the structural diagram of the floor on which our self leveling epoxy paint can apply.

Maydos Building Materials Company is a professional epoxy paint manufacturer in China. Due to our focus on quality and environmental protection, our company has obtained ISO9001:200 International Quality Management System Certification and ISO14001 International Environmental Management System Certification.
At Maydos Building Materials Company, we can produce not only epoxy floor paint, but also many other types of paint which are classified into decorative paint, corrosion resistance paint and fire retardant paint, etc. Now, our products are extensively used in international markets. They are well accepted by customers from Russia, Germany, France, America, Angola, Poland, Kazakhstan, and Mongolia, and more. Please contact us without hesitation if you have any special requirement. We look forward to working with you.